Electric Instructions -

ESP Continuos Run VAKUUM BAG OR FRAME PRESS VENEERING

The EP5 is assembled and ready to go. Screw the filter to the pump and attach the vacuum line to the filter and barb. Then you will need to screw the vacuum gauge into the filer assembly. Attach the otherend of the vacuum hose to either the vacuum bag or to your vacuum clamp.

Keep the filter clean for best results. When using the EP5 with a vacuum bag, allow the pump to runopen for 2-3 mintues after the glue is set. This is to flush out any vapors that may remain in the system.